How To Install 32 Bit Windows On 64 Bit

Windows ten 32-fleck to 64-bit upgrade (Image credit: Windows Central)

Windows 10 tin run on both 32-bit and 64-flake processor architectures. If you have a figurer with a 32-chip setup, you can upgrade to the 64-bit version without acquiring a new license. The just caveat is that in that location is no in-place upgrade path to make the switch. The only option is to perform a clean installation of Windows 10.

Although each version delivers the same features, when you upgrade to the 64-bit (x64) version, the device will be able to take advantage of large amounts of retention (up to 2TB) instead of the 4GB limitation with 32-bit (x86).

The ability to access more than memory allows yous to run more than apps simultaneously without affecting the experience, and you tin can work with a mix of both 64-chip and 32-bit programs. Also, and perhaps more chiefly, it will help you improve productivity on retentivity-intensive tasks. For example, when rendering videos, running virtual machines, and opening many tabs on your spider web browser.

In this Windows 10 guide, we will walk you through the steps to upgrade a computer from 32-flake to the 64-scrap version using an existing genuine license.

• How to cheque 64-flake hardware support on Windows 10
• How to upgrade from 32-bit to 64-flake on Windows ten

How to check 64-scrap hardware support on Windows 10

If you want to upgrade a organisation from Windows 10 32-fleck to the 64-flake version, you first demand to determine whether the processor has 64-bit support, 2GB of memory, or more, and whether the remaining parts have support for 64-scrap drivers.

Determine 64-bit compatibility using Settings

To check whether the processor can run the 64-bit of Windows 10, employ these steps:

1. Open Settings.
2. Click on Organisation.
3. Click on About.
4. Check the Installed RAM details.
5. Confirm that the information reads 2GB or higher.
6. Under the "Device specifications" section, check the Organization type details.
7. Confirm the information reads 32-fleck operating system, x64-based processor.

Source: Windows Central (Image credit: Source: Windows Cardinal)

One time you complete the steps, you tin can make up one's mind whether the device is running the 32-bit version of Windows 10 on a 64-bit processor. Nonetheless, if information technology reads 32-bit operating system, x86-based processor, the computer does not support the 64-bit version of Windows.

If the device can't run the 64-bit version, consider purchasing a new device that meets the system requirements.

Determine CPU compatibility using Coreinfo

Although most computers using relatively modern hardware can work with any version of Windows 10, you lot even so desire to ostend that the four essential features are present on the processor:

• Physical Accost Extension (PAE).
• No-eXecute (NX).
• Streaming SIMD Extensions two (SSE2).
• CMPXCHG16b (CX16).

To confirm the processor has the required features, yous can use the Microsoft Coreinfo command-line tool with these steps:

1. Open the Microsoft Sysinternals website (opens in new tab).
2. Click the Download Coreinfo link.

Source: Windows Central (Image credit: Source: Windows Cardinal)

3. Right-click the Coreinfo.zero binder and select the Excerpt all option.
4. Click the Extract button.

Source: Windows Key (Image credit: Source: Windows Central)

5. Type the post-obit command in the address bar and press Enter to open up Command Prompt in this folder location.cmd

Source: Windows Central (Image credit: Source: Windows Central)

6. Type the following command and press Enter:coreinfo
7. Search (Ctrl + F keyboard shortcut or Ctrl + Shift + F on Final) for these features:
   • PAE.
   • NX.
   • SSE2.
   • CX16.

Source: Windows Key (Image credit: Source: Windows Fundamental)

Later you consummate the steps, if the tool confirms that the features are bachelor, you can upgrade to the 64-bit version of Windows 10.

While the upgrade process should be able to confirm the processor compatibility, the "Coreinfo" tool allows y'all to bank check these features alee of time.

Determine driver compatibility

Also, it's recommended to check whether other components (such as graphics and sound cards) are compatible with the 64-bit version of Windows 10.

If the computer has the 32-fleck version of Windows ten and the hardware is relatively new, there is a adept chance that you will find 64-bit versions of the drivers. You can cheque the device manufacturer support website to ostend that the components have drivers for the x64 architecture.

How to upgrade from 32-flake to 64-bit on Windows x

A Windows 10 product central gives yous the option to install the 32-scrap or 64-scrap version. The but caveat is that you tin can't perform an in-place upgrade. Instead, y'all must delete the previous setup and perform a make clean installation to change architectures.

As part of the architecture upgrade process, you have to use the Microsoft Media Creation Tool to create a USB bootable media by connecting a USB flash bulldoze of at least 8GB of space to the computer, and then apply these steps:

1. Open Microsoft download page (opens in new tab).
2. Under the "Create Windows ten installation media" section, click the Download Now button.

Source: Windows Fundamental (Epitome credit: Source: Windows Central)

3. Double-click the MediaCreationToolxxxx.exe file to launch the tool.
4. Click the Have push button to concord to the terms.
5. Select the Create installation media (USB flash drive, DVD, or ISO file) for some other PC option.

Source: Windows Central (Epitome credit: Source: Windows Cardinal)

6. Click the Next button.
7. Articulate the Use the recommended options for this PC option.
8. Select the right linguistic communication and edition of Windows ten for the new installation.
9. Select the 64-bit (x64) pick for "Architecture."

Source: Windows Central (Image credit: Source: Windows Central)

10. Click the Side by side push button.
11. Select the USB wink bulldoze pick.

Source: Windows Central (Image credit: Source: Windows Central)

12. Click the Next button.
13. Select the USB flash drive to create the bootable media.Quick tip: If you don't see the flash drive, reconnect the device, click the Refresh bulldoze list option, and select the drive from the list.

Source: Windows Central (Image credit: Source: Windows Fundamental)

14. Click the Next button.
15. Click the Finish push button.

Once you complete the steps, the tool will proceed to download the installation files, and information technology'll create the bootable media compatible with Windows 10 64-bit.

If you don't accept a USB wink drive, yous can find many reliable and inexpensive drives (for example, the SanDisk Cruzer Glide CZ60 32GB) on Amazon.

Storage essential

(opens in new tab)

SanDisk Cruzer Glide CZ60

If you need a flash bulldoze to create a Windows ten bootable media, the Cruzer Glide CZ60 by SanDisk is a adept pick. The wink drive offers 32GB of storage and reliable data transfer speed to perform a Windows installation and store files on the become.

Windows x 32-scrap to 64-bit install

When y'all are set to upgrade to Windows 10 64-bit from 32-chip, earlier proceeding, you may need to change some settings to allow the computer to outset from a USB flash drive. This requires accessing the Basic Input/Output Organisation (BIOS) or Unified Extensible Firmware Interface (UEFI) on the motherboard to change the kick society.

Commonly, the procedure requires hitting 1 of the function keys (F1, F2, F3, F10, or F12), Esc, or Delete key as presently as you start the computer. However, the instructions can exist different depending on the manufacturer and even per device model. As a issue, you may demand to cheque the manufacturer's back up website for more specific details.

After accessing the firmware, open the "Boot" carte du jour page, configure the boot order to commencement from the USB flash drive, and save the changes.

Warning: This is a friendly reminder that you volition be making changes to the current setup, which may crusade problems and fifty-fifty information loss if yous don't practise this correctly. Before proceeding, it'due south recommended to make a temporary full fill-in of your PC. Information technology's also a good idea to create a copy of your files to an external drive or OneDrive, as yous'll accept to restore them afterwards the upgrade.

To switch from the 32-scrap to 64-bit version of Windows x, apply these steps:

1. Beginning PC with USB flash bulldoze.
2. On "Windows Setup," click the Side by side button.

Source: Windows Central (Prototype credit: Source: Windows Central)

3. Click the Install Now button.

Source: Windows Cardinal (Image credit: Source: Windows Cardinal)

4. Click the I don't have a product primal link to proceed (assuming that the computer was already properly activated).

Source: Windows Central (Image credit: Source: Windows Central)

5. Select the edition of Windows 10 (if applicative). This selection must match the edition of the license activated.

Source: Windows Central (Prototype credit: Source: Windows Central)

6. Click the Next push button.
7. Check the I accept the license terms option to continue.

Source: Windows Fundamental (Paradigm credit: Source: Windows Fundamental)

8. Click the Adjacent button.
9. Click the Custom: Install Windows only (advanced) option.

Source: Windows Fundamental (Prototype credit: Source: Windows Central)

10. Select the partition with the current installation of Windows 10 (usually "Bulldoze 0"), and click the Delete button to remove the partition from the hard drive.Quick tip: If you meet multiple partitions on the primary hard drive (Drive 0), select and delete each i. Windows x will recreate the required partitions during the installation process automatically. It's non necessary to remove the partitions on secondary drives.

Source: Windows Central (Image credit: Source: Windows Fundamental)

11. Select the empty bulldoze labeled "Bulldoze 0 Unallocated Space."
12. Click the Next button.

After yous complete the steps, the setup will install the 64-bit version of Windows 10 on the laptop or desktop computer.

Once the installation completes, you will have to go on with the on-screen directions to finish the out-of-box feel (OOBE) to create a new account, configure the preferences, and cull the privacy settings.

Information technology's also a skilful idea to check for updates on Settings > Update & Security > Windows Update to ensure that the latest patches and drivers are installed.

Finally, retrieve to restore your files from backup and reinstall your applications, including those designed for the 32-bit or 64-flake version of Windows x.

More Windows resources

For more than helpful articles, coverage, and answers to common questions most Windows 10 and Windows xi, visit the post-obit resources:

• Windows 11 on Windows Central — All you demand to know
• Windows eleven help, tips, and tricks
• Windows 10 on Windows Central — All you demand to know

Mauro Huculak is technical writer for WindowsCentral.com. His main focus is to write comprehensive how-tos to help users get the most out of Windows ten and its many related technologies. He has an It groundwork with professional certifications from Microsoft, Cisco, and CompTIA, and he'southward a recognized fellow member of the Microsoft MVP community.

Source: https://www.windowscentral.com/how-upgrade-32-bit-64-bit-version-windows-10

Posted by: powershiste1968.blogspot.com

Share this post